C102-4 Other (lesser known) techniques that one can use to manifest intention

Since the key to the control of the manifestation of our reality involves thought, then it should become clear that if we program our brain on how to think, that we can begin to manifest changes to our reality.

The technique doesn’t rely on specific thoughts, so much as how your brain tends to generate the thoughts.

There is an entire world of self-hypnosis techniques and practitioners. It runs the gambit from sessions with a trusted hypnotherapist to self-hypnosis using audio-tapes or similar devices.
As you can read elsewhere these techniques are conventionally used to stop bad habits (smoking), or to improve your personality (fear of flying, etc). Here we will concentrate on a method that you can use much the same way your use your prayer affirmations.
Only in this case we will use it to TRAIN YOUR BRAIN to think thoughts in a certain way.

This is a pretty simple method.

The first step [1] is to create a recording that you will listen to when you are undergoing self-hypnosis.

This recording will have [1.a] an entry section. This section is one that is designed to put you into a self-induced trance. In it you will tell your self to start walking down stairs. Each star that you tread upon, you will get into a more restful and deeper state of mind.
You will start at stair 100, and go down steps, 99, 98, etc. At step 0 you will come to a door. You will only be able to open the door when you are relaxed enough to begin the session.

At [1.b] you will continue the entry section, only that you are more mentally suggestive. You will now be on a level platform. You will tell yourself to be receptive to the following commands. That you will convene your mind to work with your consciousness.
That the next group of phrases will describe the situations, and realities that you will create for yourself. That your mind and your consciousness will work together to manifest those thoughts, and ideas into a combined reality that you will live within.

Then, you can [2] start placing your verbal affirmations, your prayers, your desires and all associated warnings, and specification here. Just follow the same guidelines that I have specified in making your intention / prayer list.

Then [3] add the “decompression” routine. This part walks you out of the self-hypnosis session.
It tells you that you will not consciously remember what transpired clearly, but that your mind and your consciousness is now effectively programmed to do everything within their ability to manifest the reality as specified earlier.
You will tell yourself to slowly enter into a normal day to day consciousness only that your reality will begin to change per your instructions. That you will awake rested and fine after the session.

Once you have made the self-hypnosis tape, you need to set up a system to use the tape. Often this means a part of your day where you can go into isolation and privacy. You will need to be able to close the door and tell people to leave you alone and not disturb you.

You will also need to set aside an amount of time longer than the length of the recorded tape.

You can use a computer and a *.mp3 file that you generated, or an old fashioned cassette player or anything in between.
Just make sure that whatever happens there won’t be any interruptions like some kind of advertisement pop-up in the computer display or the batteries int he cassette player running out.

Wear headphones, head sets or ear buds.

Lie down and put a light blanket on your lower torso. Your body temperature will start to decrease during the session. Dim the lights or lower the curtains. Do not allow anything to disturb you. that includes cats jumping on your belly or dogs barking for your attention.

Like the “prayer and intention board” you will do these daily sessions until you feel that you have had enough. Then you would put them aside and forget about them. Eventually things will manifest, or you will start a new campaign.

Since the key to the control of the manifestation of our reality involves thought, then it should become clear that if we program a machine to repeatedly process the thought quanta for us, we won’t need to.

You can construct a “wish machine”, and it will actually work.

The general idea behind this is to create a vortex, or “waterfall” like device that would siphon up some of the (thought related) quanta that surrounds you, your life, your abode and press them through a “filtering mesh” that would create a new emerging reality for you.

**Collect Quanta > Filter it to what you intend > Broadcast

A “machine” in this case replaces your action with your mind and physical activity to achieve your goals. It’s nothing more than an automaton.

Without getting into too much detail, understand that the components that make up the atoms, the electrons and everything in our physical world is a timeless, dimensionless entity somewhat understood or known as quanta.
They flutter about and enter all world-lines and cluster around your primary consciousness location. They are not tied to physical locations, thus their proximity to your thoughts are what is of interest here.

This quanta, that which is associated with the moment to moment operation of your consciousness within a reality, is what you want to utilize.

You want to push that particular brand or type of quanta… without your active participation… through a mesh or a filter.

To do this, you utilize a machine.

In this instance we will look at the general construction of two types of “wish machines”…

Firstly we look at an electronic “wish machine”.

The electronic device can be considered to be similar to this machine. (NOT identical.) And essentially, you place a “wish” or “image” or “concept” upon a surface, run some electrical current through it and broadcast it to the surrounding area. The device listed (in the link above) will not work very well, because of some structural defects.
But the concept is similar to this discussion herein.

The system process is as follows;

Of the components we can create a very simple “machine” that would do our work for us. The major problem with this is the physical limitations of the collection system.

Of the components we can create a very simple “machine” that would do our work for us. The major problem with this is the physical limitations of the collection system.

Collection plate. This is a series of two plates. Both preferably copper that you sandwich together with an image arrangement. The arrangement consists of a transparent overlay of what you want to add to your life, over a picture of yourself.
Make sure that that picture of you does not have any faults, as you will broadcast and amplify those faults in the device.

As such, you will present two charges to the system. One wire would connect to the top plate, the other wire would connect to the bottom plate. Combined the image & overlay would be sandwiched between and the entire apparatus would combine to form a simple capacitor.

The capacitor is a two terminal electrical conductor and that is separated by an insulator. These terminals store electric energy when they connected to a power source. One terminal stores positive energy and the other terminal stores negative charge.
Charging and discharging of the capacitor can be defined as, when electrical energy is added to a capacitor is called charging whereas releasing the energy from a capacitor is called as discharging.

Capacitors include dielectrics made from all kinds of materials. In this case the dielectric is the image or the paper upon which the affirmations are written upon.

The simplest form of a capacitor is “ parallel plate capacitor” and its construction can be done by two metal plates that are placed parallel to each other at some distance. This is what the collection plate actually is, electrically speaking.

Pulsing the Quanta. Since the capacitor can reach stability in a very short period of time; meaning that one side gets charged positively while the other side is charged negatively, you need to constantly turn the power on and off to have any kind of electrical movement through the system.
If you don’t, the charge will just sit there. Seemingly doing nothing (not really the case, but let’s not get too technical here.)

Electrical movement will “carry quanta” along with it. So you want the key quanta to move with the electrical system in operation.

This kind of movement is important. As it “refreshes” the system. It charges and discharges your desires, over and over again. It has the same net affect of reading all your affirmations over and over again within a split second (um.
Well, depending on the construction of the capacitor you created.).

Pulsing the system is easy to do. You just add a pulse circuit in the machine. The simplest is a simple timer (like a 555 or 556 DIP) with an output going direct to a transistor.
(I’m just trying to keep it simple here.) It acts as a gate and you can charge and discharge the plate until “the cows come home”. (Charge, discharge. Charge, discharge. Charge, discharge.)

Amplify. Now you can amplify the signal. You can change the current, the voltage, the power and the other aspects of the mechanism. But I am not all that convinced that there will be a corresponding amplification in the intensity of the “wishes”.

Certainly there is a relationship of sorts. The more electrons in movement, means the more quanta in movement. But how about those quanta associated with thought? The “thought quanta”.
As far as I understand it, the mere presence of the device is enough to secure “thought quanta” movement.

Personally, I believe that it is the speed at which the electrons switch back and forth to the plates that have the biggest impact. This is the “frequency” of the device.

Never the less, the system can be amplified with an “amplification circuit”. It’s just an electrical device that changes the scope of the signal to or from the plates. In other words, “why not?”

Filter. In this mechanism, the collection plate is the same as the filter. The collection plate is actually both plates in the capacitor while the filter is the dielectric image or (if you prefer) word-laden paper sandwiched in between.

The machine is most effective for single thoughts, or single-use concepts. It might not work as well for (say) a list of affirmations. So to properly use this device, you will need to create a specific dielectric.

What you do is create a base image. Usually a picture of yourself.

Then create an overlay of what you want to surround you with. The most effective method is to make a collage of things or ideas / concepts that you want. Then print it in a printer on clear acetate. Which makes a transparent image overlay.

Then your dielectric is simply the photo of you with the image overlay on top of it. Both sandwiched in between the two contact plates within the capacitor.

Now, that being said, the more astute readers will simply tear apart an old laptop and place the screen between the two plates. Then rotate desktop images in sequence. But that is a far more complex and involved DIY project to list herein.

I'll cover it elsewhere at another time. OK?

Broadcast. Finally, you do want to broadcast this system. But that’s the beauty of it. You see, the plates that you use as a capacitor are also the broadcast antenna.
While it is on, and the “thought quanta” are moving back and forth through that composite image that you created, that… is in itself… all that is required.

I provided some electrical schematics for the more electrically inclined hobbyists out there to construct. If you want, I can throw together a complete DIY post on how to construct this mechanism yourself. It's not hard, but if you've never taken on this kind of project before it might be too daunting. Besides, novices shouldn't play with electricity. Don't try it unless you know what you are doing.

But why waste the time. There are other solutions…

The rules of the physical world work the same throughout the different sciences. The only difference is their form. So let’s look at a hydraulic version…

As long as things are in movement around and through your “intention image”, the associated “thought-related quanta” will also move through that image.

Well, you can achieve a similar effect by placing your (previously mentioned) “intention capacitor plates” under a stream of running water.

Obviously, you must not make any rookie mistakes…

And that, boys and girls is all that there is to it.

One very important point. Your physical presence must be near the device. Or else the effect of the machine will entangle with the quanta of others aside from yourself.

Obviously you will run into a problem with privacy. Because sooner or later someone is going to run into your little image collage and their thoughts will impact on the intentions that you are trying to manifest.

Since the key to the control of the manifestation of our reality involves thought, then it should become clear that if you associate yourself with a particular symbol or mark that the thoughts and the history associated with the mark (or symbol) will now be associated with you.

This is both good and bad.

Which is why, boys and girls, I advise NOT getting tattoos or body adornments until you fully appreciate the consequences of your actions. Words… actions… images… and symbols all come with attraction or repellent qualities.
You need to be absolutely positive that your attachment to iconology is absolutely what you want.

This is a book that pretty much compiled the scientific experiments related to intention and ESP. It is in agreement with some of the investigations that were performed elsewhere and in alignment with my understandings. All of which are explained within the book “The Intention Experiment” by Lynne Mctaggart.

In short, you can “bless” an object through providing “good will” or “prayer”. The object would retain that quantum alignment, and then when you carry that object around, you will obtain the blessings and positive quanta associated with it.

In practical application, this means that you can create your own talisman.

It operates differently from prayer affirmations. Instead you create a talisman that will give you “luck” or “advantage” in your day to day life.

Since the key to the control of the manifestation of our reality involves thought, then it should become clear that if we clear our minds of all thought, that we can focus on the thoughts that we want to, to the exclusion of all else.

The deeply relaxing sound patterns of Hemi-Sync® Meditation will gently lead you into powerful, free-flow explorations and leave you centered, focused and totalls refreshed.

-Monroe Institute

Hemi-sync has many applications from thought control, to out-of-the-body-experiences, to remote viewing. In fact, it was utilized by the CIA for a spell, and not all of the results are unclassified.

If you have never experienced using the hemi-sync method, it might be interesting and instructive to obtain some tapes and listen to them.

Items, physical items, can “absorb” thought components. This can be good, as in the case of “blessed” objects, and can be problematic as in “cursed” objects.

Do not be under the assumption that physical objects cannot absorb thoughts and obtain “properties”. They can. That is why every language in the world has a word describing “cursed objects”.

Here’s some links to the relationship between quantum physics and thought.

Thoughts create our reality.

There are different techniques that one can use to focus, alter, control or magnify thoughts. Some of which are in common use, such as the Catholic iconology, and other shunned or frowned upon like the Golden Dawn.
Some are considered to be “fringe” and “tin foil hat” subjects like the “Wish Machine”, and some are in use by various elements of the United States government like the Hemi-sync Gateway.

You can use what ever method you feel most comfortable with.

Remember, unless you have direct control of your thoughts and actions, you will never be able to have control over your life. Control requires discipline of thought.